Friday, September 30, 2011

WIP: 1/100 NG [BANDAI] Cherudim Gundam 10

WIP: 1/100 NG [BANDAI] Cherudim Gundam
Update number 10 is up!

I trimmed the original connector of the Holsters to Dynames Knee and putty it then sand.

And then I've placed .3mm Pla-Plate on it to hide the putty and scratches.

And for Attachment. I just glued this 3 of .5 mm and add a 4 mm box on, so i can attach it on the hollow part of the side skirt for easy attachment.

Last Saturday, I bought this Tamiya Pla-Beams 2mm Square. I didn't know that this one is too thick to cut by a hobby knife only. 

This one is not that soft as the normal 2 of .5mm pla-plate sheet that you can easily cut by a hobby knife.
So here's what i have done, I used this Pla-Beams on Cheru's Feet.

I also detailed the right leg and shoulder of this guy with pla-plate and lollipop stick.

Since the seamline is not on the same position like on the right shoulder, I decided to just detail the half of this kit and leaving the left side plain to be different.

Trimmed some part.

And add Details into it! 

And here's the messy front skirt  because of the panel lines.

Here are some of the Pictures with the holsters.

The Rifle.

I also started to draw 4 Concepts for my Dio.

Thursday, September 29, 2011

WIP: 1/100 MG [BANDAI] Rick Dom 1

WIP: 1/100 MG [BANDAI] Rick Dom
I already started snap building this 1/100 Master Grade Rick Dom That I've got from MAC Anniversary Raffle. So here are some of the articulations.

I'm going to mod this kit similar to DC's DOM.

Sunday, September 25, 2011

Gunpla References 1

Gunpla References 1
I didn't sleep last night just to post these good-looking designs for gunplas!
After Seeing these Gundam Age Designs, The First thing comes to my mind is to buy this Good Articulated HG Gundam Age kit but because of Kamm and Decay's Work on their Sazabi Build-Off, Sazabi is getting my attention these past days.

Friday, September 23, 2011

WIP: 1/100 NG [BANDAI] Cherudim Gundam 9

WIP: 1/100 NG [BANDAI] Cherudim Gundam
Update 9 includes Easy-Modding on the feet and also detailing the kit.

I added some details to the lower part of the shoulders and feet.

This is my 2nd Idea. (Piston is the 1st one)
(Voting starts now. Vote on the right side of the blog)

Overall look.

I just trimmed this white part so i can bend it more.

So, here's what i'm doing to do with the legs. 
First, I sand it about 2 minutes i think, to make the seamline wider.
then I just glued the koto vents on the front part like this.

And here's the result... 
I will add more details into it to make it more different from its original look.

While thinking of the designs for the legs, i started to remove the upper part of the rifle just like in the reference.

This is what it looks like when holding H-arms custom's Gatling Guns.
I still don't know if i'm going to put it on the backpack or stick to my "Unicorn Full Armor Backpack"

I really excited to finish this kit.. here's another picture.

If you have any ideas for its Backpack, Shoulder Detailing and Color Scheme, etc. feel free to give some negative / positive comments on this post (Just Let me know what's wrong about it, Ok?) or in its WIP thread at MAC Forums.

Stay Tuned!